Sterilization Indicators

Biological indicator can be used in gravity or pre/post vacuum autoclave Use with the BioNova Incubator or MiniBio Auto-Reader Designed for Hospita...

Pre-assembled: Ready to use off the shelf Eliminates uncertainties caused by inexact pack construction Less costly than hand assembled Bowie-Dick t...

Steam, Rapid 1 hour Biological indicator can be used in gravity or pre/post vacuum autoclave Final Color Purple (pass), Yellow (fail, resulted posi...

STEAMPlus is an immediate readout integrator for use in gravity, prevacuum and immediate use cycles This product is tested to ST-60 and ISO 11140-1...

Perform a daily operational check for mechanical air removal in your steam sterilizers with this disposable test pack The ready-to-use test is easy...

Reliable, instant visual results Performance proven with timing beyond biological kill Lead Free Will not revert back to original color and may be ...

A chemical integrating indicator for monitoring the essential conditions of steam sterilization processes - saturated steam, temperature, and time ...

Each chemical indicator (CI) strip provides distinct color change when exposed to the sterilization process An internal CI should be used within ea...

EZTest Steam is a self-contained Biological Indicator inoculated with viable Geobacillus stearothermophilus bacterial spores Intended use is for mo...

Attest Biological Indicators 1292 for 250°F/121°C Gravity and 270°F/132°C Vacuum Assisted Steam Sterilizers Compliant with ANSI/AAMI/ISO 11138:2006...

Pack design provides a consistent, resistant challenge to the sterilization cycle for reliable results Integrators respond to all steam (i.e., time...

Provides BI results in 24 minutes in 3M Attest 490/490H Auto-readers with software version 4.2.7 or greater Helps deliver BI results often before a...

Biological indicator vials are easy to use and interpret with visual color readout in 24 hours Self-contained indicators significantly reduce possi...

McKesson Sterilizer Monitoring Service For use in Steam, Chemical Vapor, Dry Heat and EO Gas Sterilization processes. Includes immediate Read-Out I...

Nanosonics trophon Chemical Indicator for trophon The trophon Chemical Indicator responds to a combination of specified time, disinfectant dosage a...

Smaller test packs that free up valuable storage and shelf space Reduced ink and paper use during the manufacturing process Lower shipping costs; r...

Each box contains: (10) test packs, (10) sterilization report forms, (10) pre-addressed postage paid envelopes and instructions for use 48 hour cul...

Designed for monitoring steam sterilization cycles at 250°F (121°C) and 273°F (134°C) The correct endpoint is indicated when the entire length of t...

Process indicator card for use with steam and EO gas sterilization Designed for Aesculap Generation 3 containers

OK® Strips are indicators that monitor all critical sterilization parameters: steam, time, and temperature In sterilization cycles OK® Strips guard...